Sensaphone Desktop Monitoring Systems
- The versatile 1104 and 1108 are designed for programming
flexibility.
- Variable alarm recognition and "listen-in" time, with alarm
disable, security code access, remote sensing, and other programming
features
- Monitors power, temperature, and other important environmental
conditions to protect computers, equipment, processes and property
- Automatically contacts you at up to ( 4 on 1104 and 8 on 1108 )
locations if unsafe conditions occur
- Allows you to contact your system using any telephone, to receive
status reports and listen-in to on-site sounds
- Helps you detect problems before they turn into disasters
Now you can protect your home, equipment and processes even
when you can't be there. The Sensaphone monitors your computer rooms, equipment
centers, offices, home, livestock facility, or any unattended facility to
detect power failures, temperature extremes, intrusions, water incursion,
sounds such as smoke and burglar alarms, and other conditions of your choice.
You are alerted immediately if problems arise. The Sensaphone
automatically contacts you by phone at up to ( 4 on 1104 and 8 on 1108 )
different telephone numbers, to alert you of unsafe conditions. The system
communicates in English, and even lets you "listen-in" to actual on-site
sounds.
BUILT-IN FEATURES
- User selectable inputs, temperature or dry contact ( 4 on 1104 and 8
on 1108 )
- Microphone monitors high sound alarms and enables remote listen
in
- AC Power failure sensing with variable recognition time
- Battery condition monitor
- Clock
ADVANCED CAPABILITIES
- User Programmable: Alarm recognition time, Call delay, Inter-call
delay, Message repetitions
- Temperature sensing in Fahrenheit (-20F to 150F), or Celsius (-29C
to 65C)
- Individual temperature input calibration
- Nonvolatile memory for all programmed parameters
VERSATILE DIAL-OUT CAPABILITIES
- Alert sensors trigger pulse or tone dial out automatically
- Dials up to ( 4 on 1104 and 8 on 1108 ) numbers, up to 32 digits
each
- Continues dialing numbers in sequence, until acknowledged
- Call Progress: Intelligently detects ringing or busy signals
- Intelligent dial out to beepers and pagers
EASY CONTROL ACCESS
- Keypad for local programming and status report
- Unit can be called from any phone to verify status of all monitored
conditions
- Local or remote enabling/disabling of all dial-out conditions
- Can share a single phone line with an answering machine, allowing
full operation of both units
- Programmable security code access
SPECIFICATIONS
- Size: 7 1/2" W, 2" H, 8 1/2" D
- Batteries:( 6 ) 1.5 Volt "D" cell alkaline (not
included)
- Telephone Interface: FCC approved RJ-11 plug-in modular
connector with 6' cord
- Operating Range: Unit should be kept between 32F. and
120F.
- Temperature Sensing Range: -20F. to 150F. with remote
temperature sensor
- Shipping Weight: 4 lbs.
Sensaphone CottageSitter
FGD-1104-CS
FGD-1108-CS
All of the
features of the standard 1104 plus turn on the heat before you arrive at your
cottage or cabin! This new product is an update to our Sensaphone 1104 and
includes a remotely controllable relay that can be used to control a furnace or
air conditioner in a home, cabin or cottage.
Also available in an 1108
version.
Sensaphone BusinessSitter
FGD-1104-BS
FGD-1108-BS
All of
the features of the 1104 and: when the BusinessSitter detects an alarm, the
external alarm relay is engaged and remains engaged until manually reset via a
dial-in telephone call or via the keypad. The relay can activate any
low-voltage device such as a siren, strobe light, or X10 Universal Control
module that may then activate interior lighting and/or a video tape
recorder.
Also available in an 1108 version.
Sensaphone RemoteControl
FGD-1104-RC
FGD-1108-RC Retail:
All of the features of the 1104 in addition to offering complete remote control
of a double-pole relay. The Sensaphone RemoteControl brings you low-voltage
manual remote control. The Sensaphone RemoteControl allows the switching
between two poles of a low-voltage relay either remotely via the telephone or
via the keypad. A remote dial-in status report will even reveal the status of
the relay!
Also available in an 1108 version.
Technical data
subject to change without notice.
Sensaphone Applications
Sensaphone Prices and Pictures
Back to Pro-Vent Home Page
Contact
212 North Sturgis
Street
Mankato, MN, 56001
Ph. 507-388-7313
Fax 507-388-3730
You can reach
us by e-mail at: provent@in-touchsolutions.com
This page last
updated on 01/28/03